injection molding cost calculator

-

copy_cost_calculation


Cost of injection molding parts




The cost of injection molding is related to many factors, but mainly to the following:

- Prices of raw materials

Ask suppliers of raw materials for the price and you can easily calculate the cost. When the injection molding parts are multiplied by the raw materials price and the loss (about 4%) of the injection molding parts, the raw materials cost is calculated;

- Costs associated with injection molding

The different injection molding machines have different processing costs per hour. Assume: A 100 ton plastic injection molding machine has a processing cost of USD 30.00 per hour, so the processing cost per minute is 0.5 USD; Now you need to find out how long the injection cycle lasts and how many cavities there are in the mold, for this example, we estimate 30 seconds per cycle, then 60 shots in an hour, with 2 cavities. This means plastic machine processing costs is 30/(60 2 2) + 4, and its injection molding is $0.125 per piece.

- Costs related to secondary processes

The suppliers can help with spray / silk printing / plating, if you so request.

- Expenses related to packaging

An estimation of the packaging carton / packaging bags and other costs will be based on the injection molding part bulk.

- Transportation costs

Each part's transport cost can be calculated based on the shipment cost and the load quantity

- Personnel expenses

Due to the omission of the personnel costs in the above costs, the final price should include them.

- Revenues

Assuming it is the final and real part, you can decide according to factory conditions; usually anything between 10% and 20%. Taxes are popular with the others...


injection molding parts calculation



https://www.plasticmoulds.net/injection-molding-cost-calculator.html

Comments

Post a Comment

Popular posts from this blog

Moulage Par Injection Et Fabricant De Moules En Chine

-
Image
Moulage Par Injection Et Fabricant De Moules En Chine-Topworks En tant que fabricant chinois de moules à injection et de moules en plastique sur mesure, Topworks est fier d'offrir à ses clients des moules et des pièces en plastique de la meilleure qualité, fabriqués à l'aide de technologies avancées. Avec plus d'une décennie d'expérience, Topworks entreprend chaque projet avec un haut niveau d'expertise et de dévouement. Nous mettons à votre disposition un personnel qualifié, compétent et dévoué qui se consacre à vos besoins en matière de moulage par injection de plastique. Topworks peut fabriquer un article complet tout au long de notre processus de fabrication, ou seulement des parties d'un système, régulièrement ou de manière ponctuelle, et offrir des services d'assemblage, d'estampage et d'emballage sur mesure lorsque cela est nécessaire et requis. OBTENIR UN DEVIS GRATUIT-30% INFÉRIEUR,15 JOURS MOINS Tous les employés de T
Read more

what is plastic mold?

-
Image
What Is Plastic Mold?   What is plastic mold? The tooling used for plastic injection molding is called plastic mold or plastic injection mold . Most plastic products are molded by plastic molds. Plastic molds are divided into two types: thermosetting and thermoplastic mold ,according to the molding plastic characteristics. Based on the molding process, the plastic mold is divided into plastic injection mold, blow mold, casting mold, pressing mold,and so on. The injection mold is made up of two main sections: the moving half and the fixed half. The moving half is mounted on the moving platen of the injection molding equipment, and the stationary half is mounted on the stationary platen. Over the injection molding, the moving and the stationary half are shut to develop an injection structure and a cavity structure. Once the mold is open, the moving half and the stationary half are split up to clear away the plastic item from the plastic mold. As a way to decrease the mold de
Read more

Injection product stress mark solution

-
Image
On plastic injection products, especially for raw materials such as ABS, PP and PC, you will often see shiny stress marks on the surface of products, such as injector pin stress marks, insert stress marks and stress marks of wall thickness difference . These apparent shiny, white markings are the result of internal stresses , which are nothing more than orientation and cooling shrinkage stresses. The irregular stress marks near the gate are caused by the typical orientation stress, and the difference of wall thickness is the result of orientation and contraction stress, those stress marks are made by ejector pins and sliders . Normally , with the increase of holding pressure and time, the first occurrence is the stress mark of wall thickness difference, the stress mark of ejector pin, then the stress mark of meat thickness difference, and finally the irregular stress mark near the gate (gray section will appear on the side), which of course also depends on the specific structure of the
Read more