PMMA （Acrylic）injection molding supplier from China

PMMA （Acrylic）injection molding

Are you interested in finding a supplier and designer of Acrylic(PMMA) injection molding products for you who has a good reputation of being both reliable and cost-effective (as low as $ 0.3 per piece in some cases) with their products?

Topworks Plastic Mold is an Acrylic injection molding company in China. We specialize in Acrylic molding and can therefore help you if you are looking for an injection molding company in China that deals with Acrylic plastic parts.





PMMA injection molding



We have a wealth of experience in designing, tooling, and manufacturing Acrylic injection molding products at competitive prices worldwide. As a result, Topworks is able to offer the best standards of quality.

Hence, we are proud to be one of the few companies that can provide products from conception to reality, utilizing our wide range of PMMA injection molding services, creating Acrylic parts, manufacturing, and delivering Acrylic injection parts.

No matter if you're working on a concept or a work-in-progress, we make every step of the process in the Acrylic injection molding simpler.

What is Acrylic(PMMA) injection molding?

Acrylic is also called polymethyl methacrylate (PMMA). Due to the defects, such as low surface hardness, easy scratching, low impact resistance, and poor molding fluidity, the modification of PMMA appears a lot. Such as copolymerization of methyl methacrylate with styrene and butadiene, mixing of PMMA with PC, etc.

The flow of PMMA is worse than that of PS and ABS. The melt viscosity is sensitive to temperature changes. In the molding process, the melt viscosity is changed mainly from the injection temperature.

https://www.youtube.com/watch?v=5PHkIec5_X0

PMMA is an amorphous polymer with a melting temperature of more than 160 ° C and a decomposition temperature of 270 ° C.

-


DRYING

PMMA has a certain degree of water absorption, which reaches 0.3-0.4%, while injection molding must have a humidity below 0.1%, usually 0.04%.

The presence of water causes bubbles, streaks, and reduced transparency in the melt.

Therefore, drying treatment is required.

The drying temperature is 80-90 DEG C with a time of more than 3 hours.

Injection molding can use recycled materials 100% in some cases, and the actual quantity depends on the quality requirements, usually over 30%.

Recycled materials should avoid foreign materials; otherwise, transparency and the properties of finished products will be affected.

-


Injection Molding Machines

PMMA has no special requirements for injection molding machines. Because of its high melt viscosity needs a deeper spiral groove and a nozzle with a larger diameter hole.

If the product's strength is required to be high, low-temperature plasticization shall be adopted with screws of a larger length-diameter ratio.

In addition, PMMA must be stored in a drying hopper.

-


Mold and Gate Design

The mold temperature can be 60-80℃, the diameter of the main runner should match the internal taper, and the best angle is 5-7.

If the PMMA molded product with 4 mm wall thickness is to be injected, the draft angle should be 7, the diameter of the main runner should reach 8-10 mm, and the overall length of the gate should not exceed 50 mm.

For products with wall thickness less than 4 mm, the diameter of the runner shall be 6-8 mm.

For products with wall thickness greater than 4 mm, the runner diameter should be 8-12 mm. The depth of the side gate, tab gate should be 0.7-0.9 T(T is the wall thickness of the product), and the diameter of the pinpoint gate should be 0.8-2 mm; a smaller size should be selected for low viscosity.

Vent slots are within 0.05 depth and 6 mm wide, and the demoulding angle is between 30'-1, cavity side: 35'-1 30.

-


 Melting temperature

Shoot to air: from 210℃ to 270℃, depending on the information provided by the supplier.

Re-track, the backseat, make the injection machine nozzle away from the main runner bushing, and manually do plasticizing injection molding, which is the way to shoot to air.

-


Injection temperature

The fast shoot is available, but multi-stage injection, such as slow-fast-slow, should be used to avoid high internal stress. Slow injection speed is used for thick parts.

-


Residence time

If the temperature is 260℃, the residence time should not exceed 10 minutes at most, and if the temperature is 270℃, the residence time should not exceed 8 minutes.

How to solve PMMA injection crack?

Acrylic molded parts are usually subject to warpage, deformation, bubbles, cracks, sinks, flash, weld lines, burns, silver streaks, spray lines, and other defects during injection molding.

What solution should we adopt when warpage occurs?

Cracking is a common defect in plastic molding, and the main reason is due to stress deformation.

There are mainly residual stress, external stress, and stress deformation caused by the external environment.

-


Residual Stress

The residual stress is mainly caused by the following three factors, i.e., overfilling, ejection, and metal insert.

Residual stress due to overfilling, the solution can be mainly started from the following aspects:

Due to the minimum pressure loss of the sprue gate, if cracks are mainly generated near the gate, the multi-point distribution of point gates, side gates, and tab gates can be considered.

Ensuring that the resin does not decompose or deteriorate, appropriately increasing the resin temperature can reduce the melt viscosity and improve the fluidity. At the same time, it can reduce the injection pressure to reduce the stress.

In general, stress is easy to occur when the mold temperature is low, and the temperature should be appropriately increased. However, when the injection speed is higher, even if the mold temperature is lower, which can reduce the possibility of stress.

Too long injection and pressure holding time will also lead to stress, and it is better to shorten it appropriately or switch pressure holding for Th times.

Amorphous resins, such AS PS resin, ABS resin, PMMA resin, etc., are more prone to residual stress than crystalline resins, such as polyethylene, polyoxymethylene, etc. 

When demoulding, due to the small draft angle and rough mold core surface, the ejection force is too large, resulting in stress and sometimes even whitening or cracking around the ejector pins. It can determine the reason by carefully observing the location of cracks.

When metal parts are embedded during injection molding, stress is most likely to occur, and cracking is likely to occur after a period of time, which is extremely harmful.

This is mainly because the thermal expansion coefficients of metal and resin are very different, resulting in stress. With time, the stress exceeds the strength of the gradually deteriorated resin material, resulting in cracks.

In order to prevent the cracking caused by this, as a rule of thumb, polystyrene is basically not suitable for metal insert molding, and the metal inserts have the least influence on nylon. As the thermal expansion coefficient of glass fiber reinforced resin material is small, it is more suitable for inserts. In addition, preheating the metal insert before molding also has a good effect.

-


External Stress

The external stress here is mainly caused by stress concentration due to unreasonable design, especially at sharp corners. R/7 "-0.5-0.7 is preferable.

-


External Environment

Chemicals, water degradation caused by moisture absorption, and excessive use of recycled materials will degrade physical properties and produce cracks.
https://www.plasticmoulds.net/pmma-acrylic-injection-molding